In sanitary applications, a tangent reducer serves the purpose of connecting two pipes or tubing of different sizes while maintaining a smooth and hygienic flow path. The reducer allows for a gradual transition between the two pipe sizes, minimizing turbulence and avoiding areas where contaminants can accumulate.
Common materials used in tangent reducers for sanitary applications include stainless steel (such as 304, 316L, or 317L), which is widely used due to its corrosion resistance and suitability for hygienic environments.
Tangent reducers can come with various end types to facilitate proper connections.
Some common end types include:
- Butt Weld: These reducers have plain ends that are designed to be welded directly to the pipes or tubing using a butt welding process. Butt weld connections provide a smooth and continuous inner surface, minimizing areas for bacteria buildup. These are frequently used in orbital welding environments.
- Beveled: Tangent reducers with beveled ends have an angled surface at the end, typically at a 37° or 45° angle. These reducers are intended for welding applications where the pipes or tubing have beveled ends that need require multi-pass welding. Beveled ends allow for a smooth transition and better penetration during the welding operation.
- Grooved: Tangent reducers with grooved ends feature a groove or indentation around the circumference near the end(s). This type of end allows for a secure and reliable connection using grooved couplings. Grooved connections are commonly used in industrial and commercial applications where quick installation and disassembly are required.
- Clamp (Tri-Clamp): These reducers feature ends with a grooved profile that allows them to be secured using sanitary clamps. Clamp connections are widely used in sanitary applications due to their ease of assembly and disassembly for cleaning and maintenance.
- Threaded: Tangent reducers with threaded ends have male or female threads that enable them to be screwed onto corresponding threaded pipes or fittings. However, threaded connections are not hygenic due to the potential for thread crevices.
- Flanged: Some tangent reducers may have flanged ends, which are flat and have bolt holes for attaching the reducer to flanged pipes, fittings, valves, or equipment. Flanged connections are commonly used in larger diameter pipes or in applications where disassembly is less frequent.
- Van Stone (Loose Flange): Van Stone tangent reducers have a unique end design that incorporates a loose or free spinning flange. The flange is not directly welded or connected to the reducer but is instead loosely positioned against it. This allows for easy alignment and infinite adjustment during installation. Van Stone ends are often used in applications where frequent disassembly and reassembly are necessary, such as in process piping systems.
The selection of materials and end types for tangent reducers depends on factors such as the specific application requirements, the nature of the fluid being transported, and the prevailing sanitary standards. When selecting tangent reducers, it’s essential to consider compatibility with the existing piping system, installation requirements, and adherence to applicable sanitary regulations.
Appleton Stainless can help you determine the best material and end type for your tangent reducer. Contact Us today for more information.
Comments are closed